Hydraulic Power Press Machine

HYDRAULIC SYSTEM :

The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes.

This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates.

Pressure relief value is provided to safe guard the system and machine from overload. The Hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.

Electrical And Control Panel :

The electric control panel is located on the left hand side of the machine. If is assembled from the internationally reputed parts for consistent performance, reliability and availability. if needed to be replaced. It is wired cleanly and labelled/ferruled properly as per the international practices to help easily locate and fault and replace components conveniently.

Cyclinder :

The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN - 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron)

Table and Slide (RAM) :

Table and Slide are made of high grade heavy duty cast iron/steel fabricated and properly seasoned.

They are perfectly aligned, to each other to obtain high accuracy and precession press operation.

DESCRIPTION		VCP	VCP-0	VCP-1	VCP-2	VCP-3
CAPACITY	TONNE	30	40	60	80	100
CAPACITY	MM	90 MM	100 MM	120 MM	160 MM	170 MM
STROKE ADJUSTMENT	MM	100 MM	130 MM	150 MM	170 MM	180 MM
RAM ADJUSTMENT	MM	38 MM	38 MM	38 MM	38 MM	50 MM
HOLE IN RAM	MM	38 MM	38 MM	45 MM	51 MM	63 MM
DISTANCE BED TO RAM UP STROKE	MM	330 MM	350 MM	375 MM	405 MM	425 MM
DISTANCE BED TO RAM DOWN STROKE	MM	230 MM	220 MM	225 MM	235 MM	245 MM
DEPTH OF THROAT	MM	225 MM	225 MM	203 MM	279 MM	305 MM
LENGTH X WIDTH OF BED	MM	610 X 405 X 60 MM	610 X 450 X 60 MM	762 X 508 X 65 MM	812 X 558 X 70 MM	915 X 610 X 75 MM
BED PLATE	MM	610 X 405 X 35 MM	610 X 450 X 35 MM	762 X 508 X 40 MM	812 X 558 X 40 MM	915 X 610 X 40 MM
HOLE IN BED MM	MM	95 MM	110 MM	120 MM	140 MM	150 MM
FLOOR TO TOP OF BED	MM	810 MM	810 MM	940 MM	940 MM	940 MM
STROKE PER MINUTE (25 MM)	MM / MIN.	55 (Ideal Condition)	75 (Ideal Condition)	70 (Ideal Condition)	75 (Ideal Condition)	72 (Ideal Condition)
APPROCHING SPEED	MM / SEC.	36	51	47	52	45
PRESSING SPEED	MM / SEC.	5	7	7	9	9
RETURN SPEED	MM / SEC.	76	104	85	95	100
OIL TANK	MM	190ltr	300ltr	480ltr	620ltr	900ltr
CENTRE TO BACK	MM	225 MM	225 MM	254 MM	279 MM	305 MM
MOTOR REQUIRED	HP	3 HP	5 HP	7.5 HP	10 HP	15 HP
MOTOR RPM	RPM	1440 RPM	1440 RPM	1440 RPM	1440 RPM	1440 RPM

Call

Email - India

Email - Global

HYDRAULIC SYSTEM :

Electrical And Control Panel :

Cyclinder :

Table and Slide (RAM) :