•  
    FRAME : The robust frame is fabricated from Solid Steel Plates with heavy cross ribbing to main housing for perfectly balanced distribution of stress over the cross section eliminating deflection and vibration and thus improving die and machine life.
    		pic1

  •  
    FRAME : The robust frame is fabricated from Solid Steel Plates with heavy cross ribbing to main housing for perfectly balanced distribution of stress over the cross section eliminating deflection and vibration and thus improving die and machine life.
    		pic1

  •  
    FRAME : The robust frame is fabricated from Solid Steel Plates with heavy cross ribbing to main housing for perfectly balanced distribution of stress over the cross section eliminating deflection and vibration and thus improving die and machine life.
    		pic1

  •  
    FRAME : Rigid Frame is fabricated from steel plates with interlocked design. The interlocked construction of frame supports the ram and bed against any unexpected deflection under permissible loading condition.
    		pic1

  •  
    STANDARD ACCESSORIES : Electric Motor, Control Panel with Selection of Inch - Once - Auto mode of operation, Foot Switch, Fine Stroke adjustment rod with limit Switches, Manual Back Gauge, Standard V - Block and Punch, Manual Lubrication.
    		pic1

  •  
    FRAME : Rigid Frame is fabricated from steel plates with interlocked design. The interlocked construction of frame supports the ram and bed against any unexpected deflection under permissible loading condition.
    		pic1

  •  
    FRAME : The Frame is rigidly constructed from Solid steel plates with safeguards, It's interlocked design provides support to the bed directly on the frame to avoid weak sections at load supports.
    		pic1

  •  
    FRAME : The Frame is rigidly constructed from Solid steel plates with safeguards, It's interlocked design provides support to the bed directly on the frame to avoid weak sections at load supports.
    		pic1

  •  
    FRAME : The Frame is rigidly constructed from Solid steel plates with safeguards, It's interlocked design provides support to the bed directly on the frame to avoid weak sections at load supports.
    		pic1

  •  
    FRAME : The Frame is rigidly constructed from Solid steel plates with safeguards, It's interlocked design provides support to the bed directly on the frame to avoid weak sections at load supports.
    		pic1

  •  
    The Hydraulic Deep Drawing Presses are specifically designed for Precision Deep Drawing of Metal Plates. Available in 10 to 500 Tons, they offer High Efficiency and High Accuracy.
    		pic1

 
Production
Production Icon Thanks to the Machine Tools Yard at disposal, all Mechanical Workings of the Particulars. More Info >>
Facilities
Facilities Icon VIVEK MACHINE TOOLS is attached with ISO 9002 Certified Forging Plant having . More Info >>
Design
Design Icon Thanks to the Machine Tools Yard at disposal, all Mechanical Workings of the Particulars. More Info >>
 
 
Welcome
   
Over Crank Shearing Machine

FRAME : The Frame is rigidly constructed from Solid steel plates with safeguards, It's interlocked design provides support to the bed directly on the frame to avoid weak sections at load supports.

HOLD DOWN SYSTEM : Spring Loaded mechanical Hold Down system are provided to hold the sheet securely to avoid slipping and bowing. The pressure of each hold down unit is ample to securely hold even shorter pieces under one hold down. The increase/decrease of pressure of hold down is adjusted through Cam by adjustable lever and rods.

KNIVES : Each machine is provided with high quality single segment, (HcHcr) knives for enhanced tool life. The knives blades are four edged.

MECHANICAL BACK GAUGE : This equipment is provided with Scale to give instantaneous reading of distance between shear and back gauge to avoid errors.

FINGER GUARD : To avoid accident, Finger Guard is fitted in front of Hold down system for operator's protection without obstructing his view.

LUBRICATION : All moving parts are provided lubrication by hand operated pump for smooth operation.
STANDARD ACCESSORIES : Gear & Wheel Guard, Hand operated back Gauge, Manual Lubrication pump, Stroke counter, T-Slot front supporters, front Scale gauge.

OPTIONAL ACCESSORIES : Automatic Lubrication system, Electric Motor, Starter, V-Belt, Ball Roller or ball transfer, Foundation Bolts, Extension squaring arm etc.

NOTE : Electrical motor and blades are not under warranty.
 
 
Line Drawing Shearing Machine
 

Achieving Excellence
 

SPECIFICATION FOR OVER CRANK SHEARING MACHINE
 
MODEL CUTTING CAP. IN (MS) L. x THK. STROKE PER MINUTE TABLE HEIGHT TABLE WIDTH FRONT GAUGE REAR GAUGE MOTOR H.P./K.W. BLADE  OVERALL DIM. IN MM.
L W T L. W. H.
VOS - 1 1270X6 30 800 450 600 750 7.5/5.6 1270X70X20 2200 2000 2600
VOS - 2 1525X6 30 800 450 600 750 7.5/5.6 1525X70X20 2450 2000 2600
VOS - 3 2030X6 30 800 450 600 750 10/7.7 2030X70X20 2960 2000 2600
VOS - 4 2540X6 30 800 450 600 750 10/7.7 2540X70X20 3470 2000 2600
VOS - 5 3125X6 30 800 450 600 750 15/11.2 3125X70X20 4055 2000 2600
VOS - 6 1270X8 25 800 450 600 750 10/7.7 1270X75X20 2200 2000 2600
VOS - 7 1525X8 25 800 450 600 750 10/7.7 1525X75X20 2450 2000 2600
VOS - 8 2030X8 25 800 450 600 750 12.5/9.7 2030X75X20 2960 2000 2600
VOS - 9 2540X8 25 800 450 600 750 15/11.2 2540X75X20 3470 2000 2600
VOS - 10 3125X8 25 800 450 600 750 20/15 3125X75X20 4100 2000 2600
VOS - 11 2030X10 20 800 450 600 750 15/11.2 2030X90X22 3000 2000 2700
VOS - 12 2540X10 20 800 450 600 750 20/15 2540X90X22 3500 2000 2900
VOS - 13 3125X10 20 800 450 600 750 25/18.7 3125X90X22 4200 2000 2900
VOS - 14 2030X13 20 800 450 600 750 20/15 2030X100X25 3000 2000 3000
VOS - 15 2540X13 20 800 450 600 750 25/18.7 2540X100X25 3600 2100 3100
VOS - 16 3125X13 20 800 450 600 750 30/22.5 3125X100X25 4300 2100 3100
 
All Dimensions are in m.m. Specifications are subject to change Power Supply : 400 / 440 V., 3 Phase, 50 Hz
 
 
Home | About Us | Products | Services | Inquiry | Contact Us Copyright @ 2011 Vivek Machine Tools All Reserved