The Frame is rigidly constructed from Solid steel plates with safeguards, It's interlocked design provides support to the bed directly on the frame to avoid weak sections at load supports.
Hydraulic Hold Down system are provided to hold the sheet securely to avoid slipping and bowing allowing a clear and accurate cut.
Each machine is provided with high quality single segment, (HcHcr) knives for enhanced tool life. The knive blades are four edged.
Mechanical Back Gauge is operated by Rack Pinion arrangement for easy and accurate cutting operations. The Front gauge moves on a "T" slot provided on the table.
To avoid accident, Finger Guard is fitted in front of Hold down system for operator's protection without obstructing his view.
All moving parts are provided lubrication by hand operated pump for smooth operation.
Gear & Wheel Guard, Hand operated back Gauge, Manual Lubrication pump, Stroke counter, T-Slot front supporters, front Scale gauge.
Automatic Lubrication system, Electric Motor, Starter, V-Belt, Ball Roller or ball transfer, Foundation Bolts, Extension squaring arm etc.
Electrical equipments are not under warranty.
|MODEL||CUTTING LENGTH||CAPACITY||NOMINAL RACK ANGLE||STROKE PER MIN.||HOLD DOWN SYSTEM||MOTOR H.P. / K.W.||BLADE L X W X T||FRONT GAUGE||REAR GAUGE|
|VFR - 1||1270 X 2MM||2MM||1MM||1º||30||Mech.||3 / 2.2||1270X63X14||600||750|
|VFR - 2||1525 X 2MM||2MM||1MM||1º||30||Mech.||3 / 2.2||1270X63X14||600||750|
|VFR - 3||2030 X 2MM||2MM||1MM||1º||25||Mech.||3 / 2.2||1270X63X14||600||750|
|VFR - 4||2540 X 2MM||2MM||1MM||1º||20||Mech.||3 / 2.2||1270X63X14||600||750|
|VFR - 5||3125 X 2MM||2MM||1MM||1º||20||Mech.||5 / 3.7||1270X63X14||600||750|
|VFR - 6||1270 X 4MM||4MM||2MM||1.15º||20||Mech.||5 / 3.7||1270X63X18||600||750|
|VFR - 7||1525 X 4MM||4MM||2MM||1.15º||18||Mech.||5 / 3.7||1270X63X18||600||750|
|VFR - 8||2030 X 4MM||4MM||2MM||1.15º||15||Mech.||5 / 3.7||1270X63X18||600||750|
|All Dimensions are in m.m.||Specifications are subject to change||Power Supply : 400 / 440 V., 3 Phase, 50 Hz|