•  
    FRAME : The robust frame is fabricated from Solid Steel Plates with heavy cross ribbing to main housing for perfectly balanced distribution of stress over the cross section eliminating deflection and vibration and thus improving die and machine life.
    		pic1

  •  
    FRAME : The robust frame is fabricated from Solid Steel Plates with heavy cross ribbing to main housing for perfectly balanced distribution of stress over the cross section eliminating deflection and vibration and thus improving die and machine life.
    		pic1

  •  
    FRAME : The robust frame is fabricated from Solid Steel Plates with heavy cross ribbing to main housing for perfectly balanced distribution of stress over the cross section eliminating deflection and vibration and thus improving die and machine life.
    		pic1

  •  
    FRAME : Rigid Frame is fabricated from steel plates with interlocked design. The interlocked construction of frame supports the ram and bed against any unexpected deflection under permissible loading condition.
    		pic1

  •  
    STANDARD ACCESSORIES : Electric Motor, Control Panel with Selection of Inch - Once - Auto mode of operation, Foot Switch, Fine Stroke adjustment rod with limit Switches, Manual Back Gauge, Standard V - Block and Punch, Manual Lubrication.
    		pic1

  •  
    FRAME : Rigid Frame is fabricated from steel plates with interlocked design. The interlocked construction of frame supports the ram and bed against any unexpected deflection under permissible loading condition.
    		pic1

  •  
    FRAME : The Frame is rigidly constructed from Solid steel plates with safeguards, It's interlocked design provides support to the bed directly on the frame to avoid weak sections at load supports.
    		pic1

  •  
    FRAME : The Frame is rigidly constructed from Solid steel plates with safeguards, It's interlocked design provides support to the bed directly on the frame to avoid weak sections at load supports.
    		pic1

  •  
    FRAME : The Frame is rigidly constructed from Solid steel plates with safeguards, It's interlocked design provides support to the bed directly on the frame to avoid weak sections at load supports.
    		pic1

  •  
    FRAME : The Frame is rigidly constructed from Solid steel plates with safeguards, It's interlocked design provides support to the bed directly on the frame to avoid weak sections at load supports.
    		pic1

  •  
    The Hydraulic Deep Drawing Presses are specifically designed for Precision Deep Drawing of Metal Plates. Available in 10 to 500 Tons, they offer High Efficiency and High Accuracy.
    		pic1

 
Production
Production Icon Thanks to the Machine Tools Yard at disposal, all Mechanical Workings of the Particulars. More Info >>
Facilities
Facilities Icon VIVEK MACHINE TOOLS is attached with ISO 9002 Certified Forging Plant having . More Info >>
Design
Design Icon Thanks to the Machine Tools Yard at disposal, all Mechanical Workings of the Particulars. More Info >>
 
 
Welcome

Turning : Including various center lathes, CNC lathes, vertical and horizontal bores.

Milling : Includes various CNC & Conventional Machines.

Drilling : Including various pillar drills, radial arm drills.

Saw Cutting : Up to 200 MM dia or 200 MM square.

Stocks : Extensive stocks of base materials together with awide variety and size of flange forgings are maintained in order to manufacture special items on an urgent basis. All materials are purchased from approved mill sources and to controlled specifications.

Large stocks of flanges are maintained in Carbon Steel ANSI Pipe Flanges,150 LBS. to 300 LBS. In Sizes 1/2” NB. to 12 ” NB. are maintained. In case of requirements in any other steel grade, it can be produced and can be supplied with the lead time for the delivery. We are very precise in the delivery in any case whether the supply is from the stock or supply is from fresh production.

 
 

"Vivek Machine Tools" is the Best & Reliable source for your requirement of any kind of engineering compoents.
 

DIMENSIONAL SPECIFICATIONS OF THE FLANGES IN STOCK ANSI PRODUCTS
 

Class - 150 (SLIP-ON FLANGES)
Forge Machine
 
 

Normal 
Size

 Outside
Diameter of 
Flange		 Thickness
of Flange		 Diam. Of
raised face		 Diam of 
hub at base		 Length
thru hub		 Diam. 
of bore		 No. Of 
holes		 Diam. 
Of holes		 Diam.
of bolts		 Diam. of bolt circle Approx. weight 
pounds Kg
- O C R X Y B - - - - -
In. 1/2" 3.50 0.44 1.38 1.19 0.62 0.88 4 0.62 1/2 2.38 1
mm. 88.9 11.2 35.1 30.2 15.7 22.4 - 15.7 12.7 60.5 0.5
In 3/4" 3.88 0.50 1.69 1.50 0.62 1.09 4 0.62 1/2 2.75 2
mm 98.6 12.7 42.9 38.1 15.7 27.7 - 15.7 12.7 69.9 1
In 1" 4.25 0.56 2.00 1.94 0.69 1.36 4 0.62 1/2 3.12 2
mm 108.0 14.2 50.8 49.3 17.5 34.5 - 15.7 12.7 79.2 1
In. 1 1/4" 4.62 0.62 2.50 2.31 0.81 1.70 4 0.62 1/2 3.50 3
mm 117.3 15.7 63.5 58.7 20.6 43.2 - 15.7 12.7 88.9 1
In. 1 1/2" 5.00 0.69 2.88 2.56 0.88 1.95 4 0.62 1/2 3.88 3
mm. 127.0 17.5 73.2 65.0 22.4 49.5 - 15.7 12.7 98.6 1
In. 2" 6.00 0.75 3.62 3.06 1.00 2.44 4 0.75 5/8 4.75 5
mm. 152.4 19.1 91.9 77.7 25.4 62.0 - 19.1 15.9 120.7 2
In. 2 1/2" 7.00 0.88 4.12 3.56 1.12 2.94 4 0.75 5/8 5.50 7
mm. 177.8 22.4 104.6 90.4 28.4 74.4 - 19.1 15.9 139.7 3
In. 3" 7.50 0.94 5.00 4.25 1.19 3.57 4 0.75 5/8 6.00 8
mm. 190.5 23.9 127.0 108.0 30.2 90.7 - 19.1 15.9 152.4 4
In. 4" 9.00 0.94 6.19 5.31 1.31 4.57 8 0.75 5/8 7.50 13
mm. 228.6 23.9 157.2 134.9 33.3 116.1 - 19.1 15.9 190.5 6
In. 5" 10.00 0.94 7.31 6.44 1.44 5.66 8 0.88 3/4 8.50 15
mm. 254.0 23.9 185.7 163.6 36.6 143.8 - 22.4 19.1 215.9 7
In. 6" 11.00 1.00 8.50 7.56 1.56 6.72 8 0.88 3/4 9.50 19
mm. 279.4 25.4 215.9 192.0 39.6 170.7 - 22.4 19.1 241.3 9
In. 8" 13.50 1.12 10.62 9.69 1.75 8.72 8 0.88 3/4 11.75 30
mm. 342.9 28.4 269.7 246.1 44.5 221.5 - 22.4 19.1 298.5 14
In. 10" 16.00 1.19 12.75 12.00 1.94 10.88 12 1.00 7/8 14.25 43
mm. 406.4 30.2 323.9 304.8 49.3 276.4 - 25.4 22.2 362.0 20
In. 12" 19.00 1.25 15.00 14.38 2.19 12.88 12 1.00 7/8 17.00 64
mm. 482.6 31.8 381.0 365.3 55.6 327.2 - 25.4 22.2 431.8 29
 
 

Class - 300 (SLIP-ON FLANGES)
Forge Machine
 
 
Normal
Size		 Outside
Diameter of
Flange		 Thickness
of Flange		 Diam. of
raised face		 Diam of
hub at
base		 Length
thru hub		 Diam
of bore		 No. Of
holes		 Diam.
Of holes		 Diam.
of bolts		 Diam. of
bolt circle		 Approx
weight
pounds Kg.
- O C R X Y B - - - - -
in. 1/2" 3.75 0.56 1.38 1.50 0.88 0.88 4 0.62 1/2 2.62 2
mm. 95.3 14.2 35.1 38.1 22.4 22.4 - 15.7 12.7 66.5 1
in. 3/4" 4.62 0.62 1.69 1.88 1.00 1.09 4 0.75 5/8 3.25 3
mm. 117.3 15.7 42.9 47.8 25.4 27.7 - 19.1 15.9 88.9 1
in. 1" 4.88 0.69 2.00 2.12 1.06 1.36 4 0.75 5/8 3.50 3
mm. 124.0 17.5 50.8 53.8 26.9 34.5 - 19.1 15.9 88.9 1
in. 1 1/4" 5.25 0.75 2.50 2.50 1.06 1.70 4 0.75 5/8 3.88 4
mm. 133.4 19.1 63.5 63.5 26.9 43.2 - 19.1 15.9 98.6 2
in. 1 1/2" 6.12 0.81 2.88 2.75 1.19 1.95 4 0.88 3/4 4.50 6
mm. 155.4 20.6 73.2 69.9 30.2 49.5 - 22.4 19.1 114.3 3
in. 2" 6.50 0.88 3.62 3.31 1.31 2.44 8 0.75 5/8 5.00 7
mm. 165.1 22.4 91.9 84.1 33.3 62.0 - 19.1 15.9 127.0 3
in. 2 1/2" 7.50 1.00 4.12 3.94 1.50 2.94 8 0.88 3/4 5.88 10
mm. 190.5 25.4 104.6 100.1 38.1 74.7 - 22.4 19.1 149.4 5
in. 3" 8.25 1.12 5.00 4.62 1.69 3.75 8 0.88 3/4 6.62 13
mm. 209.6 28.4 127.0 117.3 42.9 90.7 - 22.4 19.1 168.1 6
in. 3 1/2" 9.00 1.19 5.50 5.25 1.75 4.07 8 0.88 3/4 7.25 17
mm. 228.6 30.2 139.7 133.4 44.5 103.4 - 22.4 19.1 184.2 8
in. 4" 10.00 1.25 6.19 5.75 1.88 4.75 8 0.88 3/4 7.88 22
mm. 254.0 31.8 157.2 146.1 47.8 116.1 - 22.4 19.1 200.2 10
in. 5" 11.00 1.38 7.31 7.00 2.00 5.66 8 0.88 3/4 9.25 28
mm. 279.4 35.1 185.7 177.8 50.8 143.8 - 22.4 19.1 235.0 13
in. 6" 12.50 1.44 8.50 8.12 2.06 6.72 12 0.88 3/4 10.62 39
mm. 317.5 36.6 215.9 206.2 52.3 170.7 - 22.4 19.1 269.7 18
in. 8" 15.00 1.62 10.62 10.25 2.44 8.72 12 1.00 7/8 13.00 58
mm. 381.0 41.1 269.7 260.4 62.0 221.5 - 25.4 22.2 330.2 26
in. 17.50 1.88 12.75 12.62 2.62 10.88 16 1.12 1 15.25 81
mm. 444.5 47.8 323.9 320.5 66.5 276.4 - 28.4 25.4 387.4 37
in. 12" 20.50 2.00 15.00 14.75 2.88 12.88 16 1.25 1 1/8 17.75 115
mm. 520.7 50.8 381.0 374.7 73.2 327.2 - 31.8 28.6 450.9 52
 
 

Class - 150 (WELD NECK FLANGES)
Forge Machine
 
 

Normal
Size

 Outside
Diameter of
Flange		 Thickness
of Flange		 Diam. Of
raised face		 Diam of
hub at base		 Length
thru hub		 Diam.
of bore		 No. Of
holes		 Diam.
Of holes		 Diam.
of bolts		 Diam. of bolt circle Approx. weight
pounds Kg
- O C R X Z Y - - - - -
In. ½" 3.50 0.44  1.38 1.19 0.84  1.88 4 0.62  1/2 2.38 2
mm. 88.9 11.2 35.1 30.2 21.3 47.8 - 15.7  12.7 60.5 1
in. 3/4" 3.88  0.50 1.69 1.50 1.05 2.06  4 0.62 1/2 2.75 2
mm. 98.6 12.7 42.9 38.1 26.7 52.3  - 15.7 12.7 69.9 1
in. 1" 4.25 0.56 2.00 1.94 1.32 2.19 4 0.62 1/2 3.12 3
mm. 108.0 14.2 50.8 49.3 33.5 55.6 - 15.7 12.7 79.2 1
in. 1 1/4" 4.62 0.62 2.50 2.31 1.66 2.25 4 0.62 1/2 3.50 3
mm. 117.3 15.7 63.5 58.7 42.2 57.2 - 15.7 12.7 88.9 1
in. 1 1/2" 5.00 0.69 2.88 2.56 1.90 2.44 4 0.62 1/2 3.88 4
mm. 127.0 17.5 73.2 65.0 48.3 62.0 - 15.7 12.7 98.6 2
in. 2" 6.00 0.75 3.62 3.06 2.38 2.50 4 0.75 5/8 4.75 6
mm. 152.4 19.1 91.9 77.7 60.5 63.5 - 19.1 15.9 120.7 3
in. 2 1/2" 7.00 0.88 4.12 3.56 2.88 2.75 4 0.75 5/8 5.50 8
mm. 177.8 22.4 104.6 90.4 73.2 69.9 - 19.1 15.9 139.7 4
in. 3" 7.50 0.94 5.00 4.25 3.50 2.75 4 0.75 5/8 6.00 10
mm. 190.5 23.9 127.0 108.0 88.9 69.9 - 19.1 15.9 152.4 5
In. 4" 9.00 0.94 6.19 5.31 4.50 3.00 8 0.75 5/8 7.50 15
mm. 228.6 23.9 157.2 134.9 114.3 76.2 - 19.1 15.9 190.5 7
in. 5" 10.00 0.94 7.31 6.44 5.56 3.50 8 0.88 3/4 8.50 19
mm. 254.0 23.9 185.7 163.6 141.2 88.9 - 22.4 19.1 215.9 9
in. 6" 11.00 1.00 8.50 7.56 6.63 3.50 8 0.88 3/4 9.50 24
mm. 279.4 25.4 215.9 192.0 168.4 88.9 - 22.4 19.1 241.3 11
in. 8" 13.50 1.12 10.62 9.69 8.63 4.00 8 1.00 0.88 11.75 39
mm. 342.9 28.4 269.7 246.1 219.2 101.6 - 22.4 19.1 298.5 18
in. 10" 16.00 1.19 12.75 12.00 10.75 4.00 12 1.00 7/8 14.25 52
mm. 406.4 30.2 323.9 304.8 273.1 101.6 - 25.4 22.2 362.0 24
in. 12" 19.00 1.25 15.00 14.38 12.75 4.50 12 1.00 7/8 17.00 80
mm. 482.6 31.8 381.0 365.3 323.9 114.3 - 25.4 22.2 431.8 36
 
 

Class - 300 (WELD NECK FLANGES)
Forge Machine
 
 
Normal
Size		 Outside
Diameter of
Flange		 Thickness
of Flange		 Diam. Of
raised face		 Diam of
hub at base		 Length
thru hub		 Diam.
of bore		 No. Of
holes		 Diam.
Of holes		 Diam.
of bolts		 Diam. of bolt circle Approx. weight
pounds Kg
O C R X A Y
in. ½" 3.75 0.56 1.38 1.50 0.84 2.06 4 0.62 1/2 2.62 2
mm. 95.3 14.2 35.1 38.1 21.3 52.3 - 15.7 12.7 66.5 1
in. 3/4" 4.62 0.62 1.69 1.88 1.05 2.25 4 0.75 5/8 3.25 3
mm. 117.3 15.7 42.9 47.8 26.7 57.2 - 19.1 15.9 82.6 1
in. 1" 4.88 0.69 2.00 2.12 1.32 2.44 4 0.75 5/8 3.50 4
mm. 124.0 17.5 50.8 53.8 33.5 62.0 - 19.1 15.9 88.9 2
in. 1 1/4" 5.25 0.75 2.50 2.50 1.66 2.56 4 0.75 5/8 3.88 5
mm. 133.4 19.1 63.5 63.5 42.2 65.0 - 19.1 15.9 98.6 2
in. 1 1/2" 6.12 0.81 2.88 2.75 1.90 2.69 4 0.88 3/4 4.50 7
mm. 155.4 20.6 73.2 69.9 48.3 68.3 - 22.4 19.1 114.3 3
in. 2" 6.50 0.88 3.62 3.31 2.38 2.75 8 0.75 5/8 5.00 9
mm. 165.1 22.4 91.9 84.1 60.5 69.9 - 19.1 15.9 127.0 4
in. 2 1/2" 7.50 1.00 4.12 3.94 2.88 3.00 8 0.88 3/4 5.88 12
mm. 190.5 25.4 104.6 100.1 73.2 76.2 - 22.4 19.1 149.4 5
in. 3" 8.25 1.12 5.00 4.62 3.50 3.12 8 0.88 3/4 6.62 15
mm. 209.6 28.4 127.0 117.3 88.9 79.2 - 22.4 19.1 168.1 7
in. 3 1/2" 9.00 1.19 5.50 5.25 4.00 3.19 8 0.88 3/4 7.25 18
mm. 228.6 30.2 139.7 133.4 101.6 81.8 - 22.4 19.1 184.2 8
in. 4" 10.00 1.25 6.19 5.75 4.50 3.38 8 0.88 3/4 7.88 25
mm. 254.0 31.8 157.2 145.1 114.3 85.9 - 22.4 19.1 200.2 11
in. 5" 11.00 1.38 7.31 7.00 5.56 3.88 8 0.88 3/4 9.25 32
mm. 279.4 35.1 185.7 177.8 141.2 98.6 - 22.4 19.1 235.0 15
in. 6" 12.50 1.44 8.50 8.12 6.63 3.88 12 0.88 3/4 10.62 42
mm. 317.5 36.6 215.9 206.2 168.4 98.6 - 22.4 19.1 269.7 19
in. 8" 15.00 1.62 10.62 10.25 8.63 4.38 12 1.00 7/8 13.00 67
mm. 381.0 41.1 269.7 260.4 219.2 111.3 - 25.4 22.2 330.2 30
in. 10" 17.50 1.88 12.75 12.62 10.75 4.62 16 1.12 1 15.25 91
mm. 444.5 47.8 323.9 320.5 273.1 117.3 - 28.4 25.4 387.4 41
in. 12" 20.50 2.00 15.00 14.75 12.75 5.12 16 1.25 1 1/8 17.75 140
mm. 520.7 50.8 381.0 374.7 323.9 130.0 - 31.8 28.6 450.9 64
 
 

Class - 150 (BLIND FLANGES)
Forge Machine
 
 

Normal
Size

Outside
Diameter of
Flange		 Thickness
of Flange		 Diam. Of
raised face		 No. Of
holes		 Diam.
Of holes		 Diam.
of bolts		 Diam. of 
bolt circle		 Approx. weight
pounds Kg
- O C R - - - - -
in. 1/2" 3.50 0.44 1.38 4 0.62 1/2 2.38 1
mm.  88.9 11.2 35.1 - 15.7 12.7 60.5 0.50
in. 3/4" 3.88 0.50 1.69 4 0.62 1/2 2.75 2
mm. 98.6 12.7 42.9 - 15.7 12.7 69.9 1
in. 1" 4.25 0.56 2.00 4 0.62 1/2 3.12 2
mm.  108.0 14.2 50.8 - 15.7 12.7 79.2 1
in. 1 1/4" 4.62 0.62 2.50 4 0.62 1/2 3.50 3
mm. 117.3 15.7 63.5 - 15.7 12.7 88.9 1
in. 1 1/2" 5.00 0.69 2.88 4 0.62 1/2 3.88 4
mm. 127.0 17.5 73.2 - 15.7 12.7 98.6 2
in. 2" 6.00 0.75 3.62 4 0.75 5/8 4.75 5
mm. 152.4 19.1 91.9 - 19.1 15.9 120.7 2
in. 2 1/2" 7.00 0.88 4.12 4 0.75 5/8 5.50 7
mm.  177.8 22.4 104.6 - 19.1 15.9 139.7 3
in. 3" 7.50 0.94 5.00 4 0.75 5/8 6.00 9
mm.  190.5 23.9 127.0 - 19.1 15.9 152.4 4
In. 4" 9.00 0.94 6.19 8 0.75 5/8 7.50 17
mm. 228.6 23.9 157.2 - 19.1 15.9 190.5 8
in. 5" 10.00 0.94 7.31 8 0.88 3/4 8.50 20
mm. 254.0 23.9 185.7 - 22.4 19.1 215.9 9
in. 6" 11.00 1.00 8.50 8 0.88 3/4 9.50 26
mm. 279.4 25.4 215.9 - 22.4 19.1 241.3 12
in. 8" 13.50 1.12 10.62 8 0.88 3/4 11.75 45
mm. 342.9 28.4 269.7 - 22.4 19.1 298.5 20
in. 10" 16.00 1.19 12.75 12 1.00 7/8 14.25 70
mm. 406.4 30.2 323.9 - 25.4 22.2 362.0 32
in. 12" 19.00 1.25 15.00 12 1.00 7/8 17.00 110
mm. 482.6 31.8 381.0 - 25.4 22.2 431.8 50
 
 

Class - 300 (BLIND FLANGES)
Forge Machine
 
 

Normal
size

 Outside
Diameter of
Flange		 Thickness
of Flange		 Diam Of
raised face		 No. Of
holes		 Diam.
of Holes		 Diam.
of bolts		 Diam. of
bolt circle		 Approx weibht
pounds Kg.
O C R
in. 1/2" 3.75 0.56 1.38 4 0.62 1/2 2.62 2
mm. 95.3 14.2 35.1 - 15.7 12.7 66.5 1
In. ¾" 4.62 0.62 1.69 4 0.75 5/8 3.25 3
mm. 117.3 15.7 42.9 - 19.1 15.9 82.6 1
in. 1" 4.88 0.69 2.00 4 0.75 5/8 3.50 3
mm. 124.0 17.5 50.8 - 19.1 15.9 88.9 1
in. 1 1/4" 5.25 0.75 2.50 4 0.75 5/8 3.88 4
mm. 133.4 19.1 63.5 - 19.1 15.9 98.6 2
in. 1 1/2" 6.12 0.81 2.88 4 0.88 3/4 4.50 6
mm. 155.4 20.6 73.2 - 22.4 19.1 114.3 3
in. 2" 6.50 0.88 3.62 8 0.75 5/8 5.00 8
mm.  165.1 22.4 91.9 - 19.1 15.9 127.0 4
in. 2 1/2" 7.50 1.00 4.12 8 0.88 3/4 5.88 12
mm. 190.5 25.4 104.6 - 22.4 19.1 149.4 5
in. 3" 8.25 1.12 2.00 8 0.88 3/4 6.62 16
mm. 209.6 28.4 127.0 - 22.4 19.1 168.1 7
in. 3 1/2" 9.00 1.19 5.50 8 0.88 3/4 7.25 21
mm. 228.6 30.2 139.7 - 22.4 19.1 184.2 10
in. 4" 10.00 1.25 6.19 8 0.88 3/4 7.88 27
mm. 254.0 31.8 157.2 - 22.4 19.1 200.2 2.12
in. 5" 11.00 1.38 7.31 8 0.88 3/4 9.25 35
mm.  279.4 35.1 185.7 - 22.4 19.1 235.0 16
in. 6" 12.50 1.44 8.50 12 0.88 3/4 10.62 50
mm. 317.5 36.6 215.9 - 22.4 19.1 269.7 23
in. 8" 15.00 1.62 10.62 12 1.00 7/8 13.00 81
mm. 381.0 41.1 269.7 - 25.4 22.2 330.2 2.37
in. 10" 17.50 1.88 12.75 16 1.12 1 15.25 124
mm. 444.5 47.8 323.9 - 28.4 25.4 387.4 56
in. 12" 20.50 2.00 15.00 16 1.25 1 1/8 17.75 185
mm. 520.7 50.8 381.0 - 31.8 28.6 450.9 84
 
 
Forge Machine
 
 
DN Ø TUBO 
DIN 		Ø TUBO 
ISO   		D1 DIN D1 ISO a D b f VITI N. FORI kg
15 20,0 21,3 20,5 22,0 65 95 12 14 M12 4 0,66
20 25,0 26,9 25,5 27,5 75 105 14 14 M12 4 0,82
25 30,0 33,7 30,5 34,0 85 115 14 14 M12 4 1,01
32 38,0 42,4 38,5 43,0 100 140 16 18 M16 4 1,63
40 44,5 48,3 45,0 49,0 110 150 16 18 M16 4 1,85
50 57,0 60,3 58,0 61,5 125 165 18 18 M16 4 2,46
65 76,1 76,1 77,0 77,0 145 185 18 18 M16 4 3,00
80 88,9 88,9 90,0 90,0 160 200 20 18 M16 4 3,61
100 108,0 114,3 109,0 115,5 180 220 22 18 M16 8 5,92
125 133,0 139,7 134,5 141,0 210 250 24 18 M16 8 5,92
150 159,0 168,3 160,5 170,0 240 285 24 22 M20 8 7,17
200 219,1 219,1 221,0 221,0 295 340 26 22 M20 8 9,77
250 267,0 273,0 269,0 275,0 355 405 32 25 M22 12 16,00
300 323,9 3239, 326,0 326,0 410 460 32 25 M22 12 19,30
350 368,0 355,6 370,5 358,0 470 520 36 25 M22 16 29,40
400 419,0 406,4 422,0 409,0 525 580 38 30 M27 16 36,50
450 457,2 457,2 460,2 460,2 585 640 40 30 M27 20 42,00
500 508,0 508,0 511,0 511,0 650 715 42 33 M30 20 51,00
600 609,6 609,6 612,6 612,6 770 840 44 36 M33 20 70,00
700 711,2 711,2 714,2 714,2 840 910 46 36 M33 20 70,00
800 812,8 812,8 815,8 815,8 950 1025 48 39 M36X3 24 115,00
900 914,4 914,4 917,4 917,4 1050 1125 50 39 M39X3 28 160,00
1000 1016,0 1016,0 1019,0 1019,0 1170 1225 50 42 M39X3 28 160,00
 
 
 
Home | About Us | Products | Services | Inquiry | Contact Us Copyright @ 2011 Vivek Machine Tools All Reserved